Radiant Heat Systems

Radiant Heat System Installation and Repair

A radiant heat system is different from traditional forced air heating systems in that it heats floors or panels installed in the walls or ceilings rather than the air directly. The most common form of radiant heat is hydronic (water) floor heating systems, although electric radiant floor heating solutions are available.

It’s a comfortable and energy efficient form of heat that’s been around in one form or another, for many years. However, in recent years the technology has improved to the point of becoming a more viable alternative to traditional systems, leading more homeowners to choose it for their homes.  

How Does a Radiant Heating System Work?

Radiant heating is essentially the practice of heating surfaces in the home and allowing that heat to radiate through the air around it naturally, instead of heating air and then circulating it through the home using ducts and fans. There are three primary methods used for heating these surfaces, which present the three main types of radiant heating systems: Electric Radiant Heat, Hydronic (water based) Radiant Heat and Air-based Radiant Heat.

Electric Radiant Heat

These systems consist of a series of high resistance coils wrapped in high conductance polymer that are embedded in floors or panels around your home. Electricity passes through the coils, cause them to release heat energy due to the high resistance. This heat is conducted through the polymer coating and into the floors, ceilings or walls that they are embedded in. These systems are durable and require very minimal maintenance, but the increasing costs of electricity can make operation more costly than other solutions.

Hydronic Radiant Heat

Hydronic systems are water based, requiring the use of a hot water boiler to heat the water before it is circulated through pipes that are embedded in the surfaces of your home. These systems are less costly to run than electric systems, in part due to the ability to use a boiler fed with a variety of fuel types, like gas, oil, propane or electricity. In general, this is the most efficient and cost-effective choice for heating an entire home. The downside of these systems is that repairs can be difficult and costly, due to pipes running throughout the home. This also means that water damage can sometimes result from particularly bad failures of the system. Despite this fact, these are the most popular systems due to their efficiency and subsequent cost effectiveness.

Air-Based Radiant Heat

These systems function in almost the same way as hydronic systems, except that they use air as the heat transfer medium instead of water, which means that they do not use a boiler. In general, air is a much worse medium for maintaining and transferring heat than water, making these the least efficient radiant heating solution. As a result, these are very much the least popular type of radiant heating system.

Why Choose Radiant Heat Systems?

Even Heating – Homeowners often choose radiant heat because it provides a higher level, more uniform feeling of comfort. This is in contrast to central forced air systems, which can create hot spots near heating vents, and cooler spots as the air circulates further and cools down.

Clean and Silent – The heating source is out of view (regardless of electric or hydronic installations), and radiant heat systems operate silently. Plus, for allergy sufferers and those worried about indoor air quality, radiant heat does nothing to negatively impact indoor air quality.

Considerations for Your Home

Retrofitting is a Challenge – Heating and cooling components are often integral to the basic infrastructure of the home in which they are installed. That being the case, most do not lend themselves painlessly to retrofit applications. The installation requirements of a radiant system may make you hesitate. However, custom home building or home additions may present a great opportunity to consider installing radiant heat.

You Need a Boiler For the More Popular, Hydronic Systems – Installing a hydronic radiant heating system requires a boiler. If you need to buy a new boiler it will add to the final project cost. However, installing a radiant heating system will keep operating costs low, because they operate 25% more efficiently than other forms of heat. To save an extra 10 to 20% each month, opt for a radiant system with highly conductive panels. The more conductive the panel, the less the boiler needs to work.

FAQs

How much should a typical radiant heating system cost?
The cost varies a lot, depending on the type of system, size of your home and how much retrofitting work needs to be done. A professional  analysis is needed to provide an estimate that will be at all accurate.

Does a radiant heat system cost less than the alternatives?
In general, a radiant heating system will tend to have higher up front installation costs than many alternatives, but significant savings in ongoing operational costs. A lot depends on the conditions in your home though; if you have circulation vents already in place, it will be a lot less expensive to use them instead of installing radiant coils or piping.

What type of maintenance is required?
Most maintenance issues center on the pumps and boilers, not the coils or pipes themselves. For the most part though, the pumps used today are generally maintenance free, making the boiler the biggest focus of ongoing maintenance.

Does a radiant house take a long time to heat up?
Most radiant heat systems take about a day to come up to full temperature.

How many zones can I have with my radiant heat system?
A hydronic heating can be designed with as many or as few zones as desired.

Are you interested in a radiant heating system for your home? Contact Unique Indoor Comfort today!